Recently Viewed

DewZapper Dew Heaters for Telescopes

DewZapper Dew Heaters for Telescopes
  Zoom
Price:  £27.99(Inc. 20% VAT)
+
Choose Size:  


Product Code:  DEWH-56
Manufacturer:  DewZapper


DewZapper dew heaters are the high quality solution, with a geniune Nichrome wire heating element embedded in a silicon rubber subtrate, for durability and moisture-resistance. The 22 awg silicon coated wires have a synthetic rubber outer sheath, which remains flexible even in very low temperatures reducing "cable pull" related tracking errors. The RCA power jacks are bonded with flexible glue and a heatshrink tube for strain relief. A high quality Velcro pad sewn onto an elasticated strap is included for easy fitment. An internal neoprene insulator directs heat into the optics so you won't waste any power.
 
There is simply no comparison with heaters which use thin audio cables and thin-film or "foil" heating elements, which are crimped to the wires, creating a failure point. 

DewZapper 3-4" dew heater technical specs:

  • Fits Telescope, Spotting Scope or Finder Scope optical tubes approx. 3-6" (75-130mm) OD. Total Length 52cm, width 40mm.
  • Efficient with low power consumption. (Power consumption & heat output are determined by 12v controller power setting).
  • High quality 1.2m silicon cable with rubber outer sheath, glued to RCA jack for strain relief, remaining flexible at below zero temperatures, and moisture resistant.
  • Includes neoprene insulator on the back of the heater to direct heat inwards to the optics for better efficiency.
  • High-quality long lasting Nichrome wire heating element embedded in a fused flexible silicon substrate for moisture resistance and reliability. (NO "thin-film resistors" or "foil elements" are used!)
  • Produces max 11 Watts, 0.9A at 12v 100% duty cycle.
  • High-quality Male RCA plug fits most Dew Controllers with a 12v output (never exceed 12v).

 DewZapper 5-6" dew heater technical specs:

  • Fits Celestron Nexstar 5 & 6 CPC, Evolution, Skywatcher 180 Maksutov or any telescope with 5-6" outer tube tube diameter.
  • Total Length 675mm, width 40mm.
  • Stops condensation, moisture, fogging and dew formation on telescope objective lenses or large DSLR lenses like Canon/Nikon 300mm F2.8.
  • Efficient with low power consumption. (Power consumption & heat output are determined by 12v controller power setting).
  • High quality 1.2m silicon cable with rubber outer sheath, glued to RCA jack for strain relief, remaining flexible at below zero temperatures, and moisture resistant.
  • Includes neoprene insulator on the back of the heater to direct heat inwards to the optics for better efficiency.
  • High-quality long lasting Nichrome wire heating element embedded in a fused flexible silicon substrate for moisture resistance and reliability. (NO "thin-film resistors" or "foil elements" are used!)
  • Produces max 17.5 Watts, 1.5A at 12v 100% duty cycle. High-quality Male RCA plug fits most Dew Controllers with a 12v output (never exceed 12v).

DewZapper 7-8" dew heater technical specs:

  • Fits Celestron Nexstar 8, CPC 8, Meade LX series 8" SCT, Skywatcher 180 Maksutov or any telescope with 7-9" outer tube tube dia. Total Length 870mm, width 40mm.Stops condensation, moisture, fogging on telescope lenses or large telephoto lenses.
  • Efficient with low power consumption. (Power consumption & heat output are determined by 12v controller power setting).
  • High quality 1.2m silicon cable with rubber outer sheath, glued to RCA jack for strain relief, remaining flexible at below zero temperatures, and moisture resistant.
  • Includes neoprene insulator on the back of the heater to direct heat inwards to the optics for better efficiency.
  • High-quality long lasting Nichrome wire heating element embedded in a fused flexible silicon substrate for moisture resistance and reliability. (NO "thin-film resistors" or "foil elements" are used!)
  • Produces max 20 Watts, 1.7A at 12v 100% duty cycle. High-quality Male RCA plug fits most Dew Controllers with a 12v output (never exceed 12v).

DewZapper 9-10" dew heater technical specs:

  • Fits Celestron C9.25 Series SCT, Meade LX series 10" SCT or any telescope with 9-10" outer tube tube dia.
  • Total Length 1020mm, width 40mm. Stops condensation, moisture, fogging on large telescope lenses or optics.
  • Efficient with low power consumption. (Power consumption & heat output are determined by 12v controller power setting).
  • High quality 1.2m silicon cable with rubber outer sheath, glued to RCA jack for strain relief, remaining flexible at below zero temperatures, and moisture resistant.
  • Includes neoprene insulator on the back of the heater to direct heat inwards to the optics for better efficiency.
  • High-quality long lasting Nichrome wire heating element embedded in a fused flexible silicon substrate for moisture resistance and reliability. (NO "thin-film resistors" or "foil elements" are used!)
  • Produces max 28 Watts, drawing 2.3A at 12v 100% duty cycle. High-quality Male RCA plug fits most Dew Controllers with a 12v output (never exceed 12v).

Be the first to Write a Review for this item!


Customers who bought this item also bought:


Also Bought
Starwave Bahtinov Focusing Masks

Starwave Bahtinov Focusing MasksFrom:  £10.50

The Bahtinov Mask is a great accessory to get the best focus for your telescope quickly and easily.

TELRAD Reflex Sight Red Dot Finder

TELRAD Reflex Sight Red Dot Finder£49.00   £39.00

The Telrad is the best-selling non-magnifying finder for Dobsonians, equatorial reflectors, refractors, and Schmidt-Cassegrains alike.

 

We are here to help
Email: sales@widescreen-centre.co.uk

Facebook      Twitter      Instagram     Maps     Phone

2 Rosemary Lane, Sutton nr. Ely, Cambridgeshire, CB6 2NZ
Call us: 01353 776199 or 07990 646466
9:00am-8:00pm GMT, 7 days a week