Primaluce Lab
Cables to power cooled CCD/CMOS cameras from the Primaluce Lab Eagle.
Cables to power mounts from the Primaluce Lab Eagle.
ECCO is the Environmental Computerized Controller for EAGLE that automates the management of dew heaters during long exposure astrophotography.
Sesto Senso (Sixth Sense) 2 is the best stepper motor based robotic focusing motor for your telescope!
Eagle power cable extension cord is used when you need a longer cable to power devices through the EAGLE.
The PLUS curved blocks can be easily installed on any telescope. Simply remove the screws already on the telescope and fix the curved blocks (one in front, one in rear of the optical tube) and secure with the same screws.
When we install many instruments (for example telescope with guide scope in parallel) on the mount, it can happen that they are too close together, and that some element touches the others.
The Primaluce Lab 60mm CompactGuide scope is simultaneously both a finder and a guide scope as well!
The Primaluce Lab C82 pier is made of steel and it has a high rigidity and load capacity, thanks to the central tube being 5 mm thick. Together with the adapter to connect the mount, it has a height of 82cm from the ground. If you want to install a mount
The EAGLE CORE is designed for those who start to do astrophotography and are searching for a very simple to use system or for those who want an easily transportable system as "travel telescope".