The new TGTP tripod cover is a three panel cover that opens full length on one side. Once wrapped around your tripod, the open side of the cover seals shut with a full length Velcro fastening system. Heavy duty 1 inch welting is wrapped around the top and bottom of the cover. A 2" welting is used on the open seam and has the Velcro fastening system sewn on to it. Four 2 inch spring clamps are included for securing the cover to the lower part of the legs or elsewhere as needed. Used in conjunction with any TeleGizmos scope cover, you now can protect your entire system from top to bottom. Additional uses:
Many users leave the cover on their tripod while observing or imaging if conditions are particularly dewy. The adjustable top opening allows the user to place the cover over the mount's motor drives and electronics, protecting these components from moisture. Accessory trays can still be accessed by opening the Velcro enough to reach inside the cover.
The TGTP fits all tripods with the following dimensions: Leg spread up to 50 inches, leg height up to 52 inches. The maximum circumference of top opening with cover closed 27 inches (9 inch diameter). The top opening can be adjusted to a snug fit around the mount using a supplied 2 inch pony spring clamp. Three more 2" clamps are provided to aid in wrapping and securing the cover to the tripod legs.
William Optics EyepiecesVixen Eyepieces and Barlow LensesCelestron Eyepieces & Barlow LensesBaader Eyepieces & Barlow LensesSky-Watcher and OVL Eyepieces and Barlow LensesExplore Scientific EyepiecesMeade Eyepieces and BarlowsOrion USA Eyepieces & Barlow LensesPentax Super-Wide Angle EyepiecesAPM Eyepieces and BarlowsVernonscope Eyepieces and Barlows
Altair Astro Eyepieces and BarlowsLunt and Coronado Solar EyepiecesZoom EyepiecesSpecialist EyepiecesReticle EyepiecesRonchi Eyepieces
BinoviewersEyepiece and Accessory SetsEyepiece Bags and Cases2-1¼ AdaptersEyepiece ClampsRings and ExtendersEyepiece Accessories